Linear Line EN

Compact Rail

Ordering key

Note on ordering: rails length codes are always 5 digits, sliders length codes are always 3 digits. Use zeroes as a prefix when lengths are shorter.

Rail / slider system

C R

TGV

-03600 /2/

RV

43G -4

A

-N

Surface protection (if different from Standard) see pg. CR-33, tab. 24 Configuration depending on type of slider see pg. CR-12 and CR-14

Number of rollers see pg. CR-8, tab. 1

Size see from pg. CR-11

Slider type see pg. CR-12

Number of sliders in one rail Rail length in mm see pg. CR-11, tab. 5

Rail type see pg. CR-11, tab. 4

Ordering example: TGV-03600/2/RV43G-4A-N

Rail

TGV

-43

-03600 -N

Surface protection (if different from Standard ISO 2081) see pg. CR-33, tab. 24

Rail length in mm see pg. CR-11, tab. 5

Size see pg. CR-11 Rail type see pg. CR-11, tab. 5

Ordering examples: TGV-43-03600-N (single rail); TGV-43-05680-N (joined rails) Rail composition: 1x880+2x2400 (only for joint processed rails) Hole pattern: 40-10x80-40//40-29x80-40//40-29x80-40 (please always specify the hole pattern separately)

Slider

RV

43G

-4

A

-N

Surface protection (if different from Standard) see pg. CR-33, tab. 24

Configuration depending on type of slider see pgs. CR-12 and CR-14

Number of rollers see pg. CR-8

Size see pg. CR-11

Slider type see pg. CR-12

Ordering example: RV43G-4A-N

Wipers

ZK-WR 43G Size Wiper type see pg. CR-19

Ordering example: ZK-WR43G Note on ordering: every kit contains a pair of wipers. Two wipers per slider are always required.

CR-45