Linear Line EN

Compact Rail

Rail installation without support (1) Carefully lay the guide rail with installed slider on the mounting surface and slightly tighten the fixing screws so that the guide rail lightly touches the mounting surface.

C R

Fig. 67

(2) Install a dial indicator so that the offset of the rail to a reference line can be measured. Now position the slider in the center of the rail and set the dial indicator to zero. Move the slider back and forth between each two hole spacings and carefully align the rail. Fasten the three center screws of this area now with the specified tightening torque, see fig. 68. (3) Now position the slider on one end of the rail and carefully align the rail to zero on the dial indicator.

Fig. 68

(4) Begin to tighten the screws as specified while moving the slider toge ther with the dial indicator. Make sure that it does not show any significant deflection. Repeat this procedure from the other end of the rail.

Fig. 69

CR-39