Linear Line EN

Mono Rail

Technical data

Rail

End seal

Self-lubricating element

Redirection

Slider body

Side seal

Lubrication nipple

Fig. 10

Performance characteristics: ■ Mono Rail available sizes: 15, 20, 25, 30, 35, 45, 55 ■ Standard version Miniature Mono Rail available sizes: 7, 9, 12, 15 ■ Large version Miniature Mono Rail available sizes: 9, 12, 15 ■ Max. operating speed: 3.5 m/s (137.79 in/s) (depending on application) ■ Max. operating temperature: +80 °C (+176 °F) (depending on application) ■ Available rail lengths up to approx. 4,000 mm (157.5 in) for Mono Rail (see Ordering key, pag. MR-45) ■ Four preload classes for Mono Rail: G1, K0, K1, K2 ■ Three precision classes: N, H, P ■ Three preload classes for the Miniature Mono Rails: V0, VS, V1 ■ Lengths for single rails are available up to 1,000mm (39.37 in) for the Miniature Mono Rail

Remarks: ■ Combining rails is possible (joining)

■ The fixing holes on the carriages with flange can also be used as through holes for fastening from below. Here, the reduction in size of

the screw diameter must be observed ■ Various surface coatings on request

■ Manual and pneumatic clamping elements available as accessories. Depending on the height of the carriage, additional adapter plates must be used ■ Dimensions H 2 and L of the carriage change when using metal deflec tors and other seals. Refer to Sec. 4 Accessories, pg. MR-15f ■ The carriages in size 55 are equipped with ball chains ■ Primary lubricated systems have an increased displacement resi stance

M R

MR-5