Linear Line EN

Compact Rail

K+U-system maximum offset It must be noted that the slider in the U-rail will turn during the movement and rotation of the slider in the K-rail to allow an axial offset. During the combined effect of these movements, you must not exceed the maximum values (see tab. 64). If a maximum rotated NSW or CSW- slider is obser ved (2° for size 43 and 1° for size 63), the maximum and minimum posi tion of the slider in the U rail results from the values B 0max and B 0min , which are already considered by the additional rotation caused axial offset. B 0nom is a recommended nominal starting value for the position of a NSW or CSW-slider in the U-rail of a K+U-system.

C R

B 0 max.

B 0 nom.

B 0 min.

Fig. 140

Slider type

B 0min [mm]

B 0nom [mm]

B 0max [mm]

NSW43

37.6

38.85

40.1

NSD43

37.9

39.15

40.4

NSW63

49.85

51.80

53.75

CS43

37.6

38.85

40.1

CS63

49.85

51.80

53.75

Tab. 64

CR-83