Linear Line EN

Compact Rail

Ordering key

Rail / slider system

C R

TLC

4560

/2/

NSW 28

-4

B

-2Z

-N

Expanded surface pro tection if deviation from Standard ISO 2081 see pg. CR-90, tab.71

Roller seal

see pg. CR-74

Configuration depending on type of slider see pg. CR-60 and CR-69

Number of rollers / slider length

see pg. CR-60 and CR-69

Size

see pg. CR-60 and CR-69

Slider type

see pg. CR-60 and CR-69

Number of sliders in one rail

Rail length in mm

see pg. CR-59, tab. 40

Rail type

see pg. CR-59, tab. 39

Ordering example: TLC-04560/2/NSW28-4B-2Z-N, TLC-04560/2/CS28-100-2RS-B-N Rail composition: 1x3280+1x1280 (only for joint processed rails) Hole pattern: 40-40x80-40//40-15x80-40 (please always specify the hole pattern separately) Notes on ordering: The rail length codes are always 5 digits, the slider length codes are always 3 digits; use zeroes as a prefix when lengths are shorter

Rail

TLV

-43

-5680

-N Expanded surface protection if deviation from Standard ISO 2081

see pg. CR-90, tab.71

Rail length in mm

see pg. CR-59, tab. 40

Size

see pg. CR-59, tab. 39

Rail type

see pg. CR-59, tab. 39

Ordering example: TLV-43-05680-N Rail composition: 1x880+2x2400 (only for joint processed rails)

Hole pattern: 40-10x80-40//40-29x80-40//40-29x80-40 (please always specify the hole pattern separately) Notes on ordering: The rail length codes are always 5 digits; use zeroes as a prefix when lengths are shorter

CR-101