| Content | 6 |
| Technical features overview | 16 |
| COMPACT RAIL | 19 |
| COMPACT RAIL PLUS | 25 |
| Product explanation | 26 |
| Technical data | 29 |
| Performance characteristics - Notes | 29 |
| Configurations and behavior of the slider under yawing moment Mz | 30 |
| Load capacities | 32 |
| Product dimensions | 35 |
| TG / TMG -rail, Rail length | 35 |
| R-version slider | 36 |
| RD-version slider | 38 |
| TG / TMG -rail with sliders | 40 |
| Offset of fixing holes | 41 |
| Accessories | 42 |
| Rollers | 42 |
| Wipers, Alignment fixtures, Fixing screws | 43 |
| Technical instructions | 44 |
| Linear accuracy | 44 |
| Points of contact between rollers and raceways | 46 |
| Sliders composition | 47 |
| V+P/U-system tolerance compensation | 48 |
| A+P/U-system tolerance compensation | 50 |
| Preload | 53 |
| Drive force | 54 |
| Lubrication, Slider lubrication | 56 |
| Corrosion protection, Speed and acceleration, Operating temperatures | 57 |
| Installation instructions | 58 |
| Fixing holes | 58 |
| Adjusting the sliders | 59 |
| Use of radial ball bearing rollers | 60 |
| Installing the single rail | 61 |
| Parallel installation of two rails | 64 |
| Installation of the self-aligning systems | 66 |
| Joined rails | 67 |
| Installation of joined rails | 68 |
| Ordering key | 69 |
| COMPACT RAIL | 71 |
| Product explanation | 72 |
| Self-aligning linear guides with bearings and C-profile featuring newly designed robust steel slider | 72 |
| Technical data | 75 |
| Configurations and behavior of the slider under yawing moment Mz | 76 |
| Load capacities | 78 |
| Product dimensions | 82 |
| Rail T, U, K | 82 |
| Rail length | 83 |
| NSW/NSA-version slider | 84 |
| NSW...L/NSA...L-version slider | 88 |
| NSD/NSDA-version slider | 90 |
| CS-version slider | 92 |
| T-rail with NSW / NSD / CS slider | 94 |
| U-rail with NSW / NSD / CS slider | 95 |
| K-rail with NSA / NSDA / CSK slider | 96 |
| Offset of fixing holes | 97 |
| Accessories | 98 |
| Rollers | 98 |
| Wipers, Alignment fixture AT (for T- and U-rail), Alignment fixture AK (for K-rail) | 99 |
| Fixing screws | 100 |
| Manual clamp elements | 101 |
| Technical instructions | 102 |
| Linear accuracy | 102 |
| Supported sides | 103 |
| T+U-system tolerance compensation | 104 |
| K+U-system tolerance compensation | 106 |
| Preload | 109 |
| Drive force | 111 |
| Lubrication, NSW-Slider lubrication | 113 |
| CSW-slider lubrication | 114 |
| Corrosion protection, Speed and acceleration, Operating temperatures | 114 |
| Installation instructions | 115 |
| Fixing holes | 115 |
| Adjusting the sliders, Use of radial ball bearing rollers | 116 |
| Installing the single rail | 117 |
| Parallel installation of two rails | 119 |
| Installation of the T+U- or the K+U-system | 121 |
| Joined Rails | 122 |
| Installation of joined rails | 124 |
| Ordering key | 125 |
| Calculation formulas | 127 |
| Static load | 127 |
| Slider load | 128 |
| Service life | 131 |
| X-RAIL | 133 |
| New X-Rail | 134 |
| Product explanation | 136 |
| Technical data | 138 |
| Performance characteristics - Notes | 138 |
| Load capacities | 139 |
| Product dimensions | 140 |
| TEN/TEP - Rollon-Nox hardened steel guides with shaped raceways | 140 |
| UEN/UEP - Rollon-Nox hardened steel guides with flat raceways | 142 |
| TES - Zinc-plated steel guides with shaped raceways | 144 |
| UES - Zinc-plated steel guides with flat raceways | 147 |
| TEX - Stainless steel guides with shaped raceways | 149 |
| UEX - Stainless steel guides with flat raceways | 152 |
| Accessories | 154 |
| Rollers | 154 |
| Wipers, Fixing screws | 158 |
| Technical instructions | 159 |
| Lubrication | 159 |
| T+U-System | 160 |
| Service life calculation for N/P-series | 162 |
| Static load | 164 |
| Adjusting the slider | 165 |
| Use of radial ball bearing rollers | 166 |
| Anticorrosion treatments | 167 |
| Ordering key | 168 |
| EASYSLIDE | 171 |
| Product explanation | 172 |
| Technical data | 174 |
| Dimensions and load capacity | 175 |
| SN | 175 |
| SNK | 180 |
| Technical instructions | 182 |
| Static load | 182 |
| Service life | 184 |
| Clearance and preload - Coefficient of friction - Linear accuracy | 185 |
| Speed - Temperature | 185 |
| Anticorrosive protection - Lubrication | 196 |
| Fixing screws - Installation instructions | 187 |
| SNK joined rails | 188 |
| Instructions for use | 189 |
| SN Standard configurations | 190 |
| Ordering key | 192 |
| CURVILINE | 195 |
| Product explanation | 197 |
| Technical data | 199 |
| Product dimensions | 200 |
| Rails with constant/variable radii with tempered raceways | 200 |
| Rails with constant/variable radii in carbon steel | 202 |
| Rails with constant/variable radii in stainless steel | 204 |
| Technical instructions | 206 |
| Slider with joint | 206 |
| Load capacities - Anticorrosive protection | 207 |
| Lubrication - Setting the preload | 208 |
| Ordering key | 210 |
| O-RAIL | 213 |
| Product explanation | 214 |
| General characteristics | 215 |
| Configurations | 216 |
| Dimensions and load capacity | 217 |
| FXRG series | 217 |
| Accessories | 219 |
| Rollers for FXRG | 219 |
| Technical instructions | 221 |
| Mounting configurations | 221 |
| Lubrication - Joined Rails | 223 |
| Installation of joined rails | 224 |
| Ordering key | 225 |
| PRISMATIC RAIL | 227 |
| Product explanation | 228 |
| Technical data | 230 |
| Product dimensions | 231 |
| Steel V-shaped rails | 231 |
| Machining: drilled guide rails with straight cut | 231 |
| Machining: drilled guide rails with 1 straight and 1 slanting cut | 232 |
| Machining: drilled guide rails with 2 slanting cut | 232 |
| Tilting roller slides with 4 rollers Ø30 for V-shaped guide rails 28x11 | 233 |
| Tilting roller slides with 4 rollers Ø40 for V-shaped guide rails 35x16 | 234 |
| Type G roller slides (roller Ø52) and H type (roller Ø62) for V-shaped guide rails 55x25 | 235 |
| I-type roller slides (roller Ø52) and L-type (roller Ø62) for V-shaped guide rails V 55x25 | 236 |
| Accessories | 237 |
| V-shaped rollers (Guide Rails 28.6 x 11) anti-oxidized version | 237 |
| V-shaped rollers [rails 35 x 16] | 237 |
| Spare roller with pin | 238 |
| Assembly Pins, Type 0 assembly pins suitable for roller slide Ø30 and Ø40 | 239 |
| Type 7 assembly pins suitable for roller slide E-F, Assembly pins type 8 suitable for carriage E-F | 240 |
| Type 9 assembly pins suitable for tilting roller slides G-H / I-L | 241 |
| V-shaped guide rail assembly inserts | 242 |
| Technical instructions | 243 |
| Ordering key | 244 |
| SPEEDY RAIL | 247 |
| Product explanation | 248 |
| Technical data | 249 |
| Dimensions | 249 |
| Rollers and roller assemblies | 249 |
| Speedy Rail 35 | 250 |
| "Speedy Rail 35" guide and specification | 250 |
| "Speedy Rail 35" assemblies and componentsomponents | 251 |
| Speedy Rail 48 | 254 |
| "Speedy Rail C 48" guide and specification | 254 |
| "Speedy Rail C 48" assemblies and components | 255 |
| Rollers and roller boxes for "Speedy Rail C 48" guide | 256 |
| Roller boxes for "Speedy Rail C 48" guide | 257 |
| Speedy Rail 60 | 258 |
| "Speedy Rail Mini" guide and specification | 258 |
| "Speedy Rail Mini" roller assemblies and components | 259 |
| "Speedy Rail Mini" guide and components | 260 |
| Dovetail clamps and fishplates | 261 |
| Roller assembly and "V" rollers "Light" | 262 |
| Roller assemblies and "V" rollers | 263 |
| Speedy Rail 90 | 265 |
| "Middle Speedy Rail" guide and specifications | 265 |
| "Middle Speedy Rail" assemblies and components | 266 |
| "Middle Speedy Rail" guide and components | 267 |
| Dovetail clamps and fishplates | 268 |
| Plastic compound shell "V" rollers | 269 |
| Roller assembly with "V" shaped rollers | 270 |
| Speedy Rail 120 | 271 |
| "Standard Speedy Rail" guide and specifications | 271 |
| "Standard Speedy Rail" assemblies and components | 272 |
| "Standard Speedy Rail" guide and specifications | 273 |
| Components for speedy rail SR120 guide | 274 |
| Standard dovetail clamps | 275 |
| Racks components for rigid mounting | 276 |
| Standard fixing fishplates | 277 |
| Plastic compound shell "V" rollers | 278 |
| Roller assembly with "V" rollers | 280 |
| Plastic compound shell rollers | 281 |
| 2 Rollers light full-block assembly | 282 |
| Compact roller assembly with plastic compound rollers | 283 |
| Full-block roller assembly | 284 |
| Roller assembly with 4 rollers | 285 |
| Narrow/wide base blindo beam roller assembly | 286 |
| 8 Rollers blindo beam roller assembly | 287 |
| Light 4 rollers floating assembly for Speedy Rail guides | 288 |
| Floating roller assembly with 4 rollers - short/long pivot | 289 |
| Rollers assembly, one fixed, one self adjusting | 290 |
| Floating roller assembly with 6 rollers - short/long pivot | 291 |
| Floating roller assembly with 8 rollers - short/long pivot | 292 |
| Assembling diagram for rigid mounted rack | 294 |
| Standard racks | 295 |
| Standard scrapers | 296 |
| Speedy Rail 180 | 297 |
| Wide body multi groove speedy rail guide and specifications | 297 |
| Roller assemblies and components | 298 |
| Wide body multi groove speedy rail guide and specifications | 299 |
| Components for wide body multi groove Speedy Rail guide | 300 |
| Roller assembly with "V" shaped rollers | 301 |
| Roller assembly with 4 rollers | 302 |
| 8 Rollers floating assembly - complete pairing | 303 |
| Backing plate for floating roller assemblies | 304 |
| Speedy Rail 250 | 305 |
| Super wide body multi groove Speedy Rail guide and specifications | 305 |
| Roller assemblies and components | 306 |
| Superwide body multi groove Speedy Rail guide and specifications | 307 |
| Components for super wide body Speedy Rail guide | 307 |
| Roller assembly with "V" shaped rollers | 309 |
| Technical details | 310 |
| Mechanical and technological components specifications | 310 |
| Treatments on all light alloy components | 311 |
| Rollers - Roller assemblies | 311 |
| Rollers adjustments - Torque settings | 312 |
| Scrapers - Drive head | 312 |
| Lubrication - Life testing | 313 |
| Summary table Speedy Rail guides | 314 |
| Loads on a 4 'V' rollers trolley | 315 |
| Loads on twin 4 'V' rollers trolleys | 319 |
| Loads on a 4 'V' rollers vertical trolley | 320 |
| Cilindrical roller loads | 321 |
| Load capacities for C Rollres assemblies | 323 |
| Load capacities for V Rollers assemblies | 327 |
| User suggestions | 328 |
| Applications | 331 |
| Ordring key | 336 |
| MINIROLLER RAIL | 345 |
| 7 main advantages | 346 |
| Product explanation | 348 |
| Compact linear guide with rollers, induction hardened and honed raceways | 348 |
| Technical data | 350 |
| MiniRoller Rail load capacities | 351 |
| Product dimensions | 352 |
| Rail width, Rail length | 352 |
| Slider, Mounted sliders and rails | 353 |
| Accessories | 354 |
| Rollers | 354 |
| Technical Instructions | 355 |
| Lubrication, Corrosion protection | 355 |
| Preload, Setting the preload | 356 |
| Speed and acceleration, Operating temperatures | 357 |
| Installation instructions | 358 |
| Installation of two rails in parallel | 358 |
| Ordering key | 359 |
| Calculation formulas | 360 |
| Static load | 360 |
| Slider load | 361 |
| Service life | 364 |
| MONO RAIL | 367 |
| Product explanation | 368 |
| Technical data | 371 |
| Mono Rail load capacities | 372 |
| Miniature Mono Rail load capacities | 373 |
| Product dimensions | 374 |
| MRS - carriage with flange | 374 |
| MRS…W – carriage without flange | 375 |
| MRT…W – carriage without flange | 376 |
| MRR...F – rails mounted from below | 377 |
| Miniature Mono Rail standard width | 378 |
| Miniature Mono Rail large width | 379 |
| Accessories | 380 |
| Safety equipment and covers | 380 |
| Metal cover strip - Flush cap | 382 |
| Clamping elements | 383 |
| Manual clamp HK | 384 |
| Pneumatic clamp MK / MKS | 385 |
| Adapter plate | 386 |
| Technical instructions | 387 |
| Mono Rail precision | 387 |
| Miniature Mono Rail precision | 388 |
| Mono Rail Radial clearance / preload | 389 |
| Miniature Mono Rail Preload | 390 |
| Anticorrosive protection, Mono Rail lubrication | 391 |
| Miniature Mono Rail lubrication | 392 |
| Mono Rail lubrication nipple | 394 |
| Mono Rail loading | 395 |
| Mono Rail service life | 396 |
| Miniature Mono Rail loading | 397 |
| Miniature Mono Rail service life | 398 |
| Friction / displacement resistance | 400 |
| Mono Rail installation instructions | 401 |
| Miniture Mono Rail installation instructions | 403 |
| Installation examples | 408 |
| Ordering key | 409 |
| Mono Rail hole pattern | 411 |
| Miniature Mono Rail hole pattern | 412 |
| Guides suitable for all applications | 414 |
| myRollon | 416 |