Easyslide EN

EASYSLIDE | Data sheet

■ SN with multiple synchronized sliders

SN 63 850 (370+290) 400 1330 K1

N Z

Surface treatments - if different from standard - N= nickel plating Z= zinc-nickel Standard = no code - G1 = increased clearance - K1 = increased preload

Rail length [mm]

Stroke [mm]

Individual length of slider [mm]

Apparent length, S´ of the slider

Size

Series Ordering example 1: SN63-0850(370+290)-0400-1330 Ordering example 2: SN63-0850(370+290)-0400-1330-K1-N Notes on ordering: rail and slider lengths, as well as strokes, are always stated with 4 digits. Please use zeros to fill in for lengths with less than 4 digits.

■ Series SNK

SNK 43

1X 110 2320 TSC

N Z

Surface treatments - if different from standard - N= nickel plating Z= zinc-nickel

Type of rail

Rail length [mm]

Slider length [mm]

Number of sliders for each rail

Size

Series Ordering example: SNK43-1x110-02320-TSC-N Rail kit: 1x2000+1x320 (only for joined rails) Drilling pattern: 40-40x80-40//40-15x80-40 (always state the drilling pattern separately) Note for ordering: rail lengths are always shown with five figures, and slider lengths are indicated with three figures preceded by zeros.

rollon.com

5