Easyslide EN

EASYSLIDE | Data sheet

Off-center load P of the slider (SN series): For an off-center load of the slider, the different load distribution on the balls must be accounted for with a reduction of the load capacity C. As shown in the diagram to the right, this reduction in distance d, from the loading point is dependent on the slider center. The value, q, is the position factor, the distance, d, is expressed in fractions of slider length S. The permissible load, P, decreases as follows:

P = q · C 0rad P = q · C 0ax

for a radial load

for an axial load

Fig.30

Fig.31

For the static load and the service life calculation, P0rad and P0ax must be replaced with the equivalent values calculated as follows (see fig. 27):

P q P 0rad = P q P 0ax =

if the external load, P, acts radially

if the external load, P, acts axially

Fig.32

Fig.33

rollon.com

22